Polymeric solutions for your next application
Click 'Add' to save a document to your own Victrex folder
Very easy flow grade for injection moulding of thin sections and complex parts
Easy flow grade for injection moulding of thin sections and complex parts
Standard flow for wire coating, capillary tubing, film and monofilament extrusion
Easy flow for injection moulding of thin sections and complex parts
Very easy flow, 30% glass fibre reinforced, black colour, for direct food contact applications
Very easy flow, superior mechanical performance, 20% carbon fibre reinforced
Easy flow, superior mechanical performance, 40% carbon fibre reinforced
Standard flow 30% carbon fibre reinforced HT resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX PEEK resin
Standard flow 30% glass fibre reinforced HT resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX PEEK resin
Easy flow higher temperature fine powder than unfilled VICTREX PEEK for compression moulding
Standard flow higher temperature coarse powder than unfilled VICTREX PEEK for compression moulding
Standard flow 30% carbon fibre reinforced ST resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX HT resin
30% glass fibre reinforced ST resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX HT resin
Standard flow, higher temperature performance than VICTREX HT, improved mechanical performance at elevated temperatures
Standard flow, higher temperature performance than VICTREX HT coarse powder for extrusion compounding
Unfilled semi-crystalline films available in thicknesses from 8µ up to 750µ
Mineral filled semi-crystalline films available in thicknesses from 12µ to 125µ
Unfilled semi-crystalline films available in thicknesses from 50μ to 100μ (black colour)
Unfilled amorphous films available in thicknesses from 6µ up to 300µ
Mineral filled amorphous films available in thicknesses of 100µ & 125µ
Dry powder, with particle size ranges specifically for electrostatic coating applications and liquid dispersion formulations. Natural colour.
Used where higher temperature performance is required in formulation of liquid dispersions.
A VICTREX PEEK dispersion with high temperature resistance of 260°C (500°F). Natural colour.
Tough resilient, high wear resistant coating with varying levels of solid lubricant resins. Natural or black colour.
Specially formulated grades to provide a resilient coating with varying levels of solid lubricant resins that give good release and excellent wear properties.
Enhanced adhesion grade specially formulated for use on metal substrates where limited surface roughening is possible. Blue in colour.
A VICTREX HT dispersion with high continuous use temperature and excellent wear and abrasion properties. Natural colour.
Specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with very good continuous release properties. Natural colour.
Formulated with VICTREX HT and a solid lubricant resin and black pigment to provide an even higher temperature tough, resilient, high wear resistant coating with good release properties.
Click 'Add' to save a document to your own Victrex folder