Go back to datasheets

VICTREX HT™ POLYMER P45

High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, coarse powder for extrusion compounding, low flow, FDA food contact compliant, colour natural.

Material Properties
Physical

Nominal Value

Unit

Test Method

Density (Crystalline)

1.30

g/cm³

ISO 1183
Mechanical

Nominal Value

Unit

Test Method

Tensile Modulus (23°C)

4200

MPa

ISO 527-1

Tensile Stress (Yield, 23°C)

100

MPa

ISO 527-2

Tensile Strain (Break, 23°C)

15

%

ISO 527-2

Flexural Modulus (23°C)

4200

MPa

ISO 178

Flexural Stress (23°C)

170

MPa

ISO 178
Impact

Nominal Value

Unit

Test Method

Notched Izod Impact Strength (23°C)

6.5

kJ/m²

ISO 180/A

Unnotched Izod Impact Strength (23°C)

No Break

ISO 180
Thermal

Nominal Value

Unit

Test Method

Glass Transition Temperature

ISO 11357-2

Onset

152

°C

Midpoint

160

°C

Melting Temperature

373

°C

ISO 11357-3
Fill Analysis

Nominal Value

Unit

Test Method

Melt Viscosity (400°C)

350

Pa·s

ISO 11443
Typical Processing Information
Extrusion

Nominal Value

Unit

Drying Temperature

120 to 150

°C

Drying Time

3.0 to 5.0

hr

Melt Temperature

400 to 420

°C

Extrusion Notes

Important notes:

1) Processing conditions quoted in our datasheets are typical of those used in our processing laboratories

Detailed data available on our website www.victrex.com or upon request.

Hi, do you have PEEK questions I can help with?

Vic
Loading...