全標準グレードの製品データシートがこちらからご覧いただけます
‘保存’をクリックするとデータがMy Victrexに保存されます
Very easy flow grade for injection molding of thin sections and complex parts
Standard flow for wire coating, capillary tubing, film and monofilament extrusion
Easy flow for injection molding of thin sections and complex parts
Very easy flow, 30% glass fiber reinforced, black color, for direct food contact applications
Very easy flow, superior mechanical performance, 20% carbon fiber reinforced
Easy flow, superior mechanical performance, 40% carbon fiber reinforced
Semi crystalline granules for injection moulding, easy flow, colour black
Standard flow 30% carbon fiber reinforced HT resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX PEEK resin
Standard flow 30% glass fiber reinforced HT resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX PEEK resin
Easy flow higher temperature fine powder than unfilled VICTREX PEEK for compression molding
Standard flow higher temperature fine powder than unfilled VICTREX PEEK for compression molding
Standard flow 30% carbon fiber reinforced ST resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX HT resin
30% glass fiber reinforced ST resin for improved strength and stiffness at elevated temperatures; Higher temperature performance than VICTREX HT resin
Standard flow, higher temperature performance than VICTREX HT, improved mechanical performance at elevated temperatures
Standard flow, higher temperature performance than VICTREX HT coarse powder for extrusion compounding
Strong & stiff enough to replace metal. Glass fiber reinforced PEEK granules for injection moulding, natural/beige & black
Strong & stiff enough to replace metal. Carbon fiber reinforced PEEK granules for injection moulding, black
Tough & ductile. Glass fiber reinforced PEEK granules for injection moulding and extrusion, natural/beige & black
Tough & ductile. Carbon fiber reinforced PEEK granules for injection moulding and extrusion, black
Unfilled semi-crystalline films available in thicknesses from 8µ up to 750µ
Mineral filled semi-crystalline films available in thicknesses from 12µ to 125µ
Unfilled semi-crystalline films available in thicknesses from 50μ to 100μ (black color)
Unfilled amorphous films available in thicknesses from 6µ up to 300µ
Mineral filled amorphous films available in thicknesses of 100µ & 125µ
Dry powder, with particle size ranges specifically for electrostatic coating applications and liquid dispersion formulations. Natural color.
A VICTREX PEEK dispersion with high temperature resistance of 260°C (500°F). Natural color.
Tough resilient, high wear resistant coating with varying levels of solid lubricant resins. Natural or black color.
Specially formulated grades to provide a resilient coating with varying levels of solid lubricant resins that give good release and excellent wear properties.
Specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with very good continuous release properties. Natural color.
Enhanced adhesion grade specially formulated for use on metal substrates where limited surface roughening is possible. Blue in color.
‘保存’をクリックするとデータがMy Victrexに保存されます