APTIV Film Grades

APTIV film is available in several grades according to the specific needs of the end use application. Within each grade a broad range of thicknesses are available from 6 to 750 microns.  The standard width of APTIV film is 610 mm, although some films can be provided in widths up to 1500 mm.  The stock rolls of film can be further slit down to widths of as low as 45 mm. Matte/Gloss or Gloss/Gloss surface finishes of APTIV film are standard. Other surface finishes are available upon request.

APTIV Film 1000 Series

APTIV 1000 has a unique combination of properties providing high temperature performance, light weight, mechanical strength, durability, excellent radiation, hydrolysis and chemical resistance, electrical insulation, wear and abrasion resistance, excellent barrier properties with high purity, good flammability without the use of flame retardants, low toxicity of combustion products, and low moisture absorption in a film format. Inherently halogen free and ease of processing makes APTIV film a technology enabler for our customers and end users.

APTIV Film 2000 Series

APTIV 2000 series films are unfilled amorphous films available in thicknesses from 6 microns up to 300 microns. The 2000 series of films are typically selected for processing to semi-crystalline nature using a thin gauge thermoforming process, and where either ductility or a level of optical clarity are required. If, in applications, or processing, temperatures above the glass transition temperature (Tg) of VICTREX PEEK (143°C/289°F) are experienced, then the amorphous film will revert to the semi­crystalline form. This property is particularly advantageous when thermoforming parts from APTIV film.

APTIV Film 1100 Series

APTIV 1100 series are mineral filled semi-crystalline films with the filler content being available at several loadings according to the application needs. The films are available in thicknesses from 12 microns upwards. The film is typically specified where either a higher modulus or lower coefficient of thermal expansion is required, than is offered by the 1000 series of APTIV film, in the application. 

APTIV Film 2100 Series

APTIV 2100 series are mineral filled amorphous films with the filler content being available at several loadings according to the application needs. The films are available in thicknesses from 12 microns upwards. The film is typically specified for processing to the semi-crystalline form using a thin gauge thermoforming process where either a higher modulus or thermal expansion is required, than is offered by the 2000 series of APTIV film, in the application. If, in applications, or processing, temperatures above the glass transition temperature (Tg) of VICTREX PEEK (143°C/289°F) are experienced, then the amorphous film will revert to the semi-crystalline form. This property is particularly advantageous when thermoforming parts from APTIV film.

Access our APTIV Film Literature for more information.

Have a Victrex APTIV film ask the expert contact you for more information.

See how the APTIV film grades can improve your performance today.